ook ik had problemen deze versie werkend te krijgen, uiteindelijk alles opnieuw (image op sd card, back-up met de hand, daarna opgestart, en database weer geïmporteerd), leek niet te werken, maar ben naar bed gegaan, en vanmorgen werkt het gewoon.
Het lijkt dus dat deze versie 3.0.1 veel langer nodig heeft de database terug te zetten?
ik hoop dat met deze versie mijn watermeter probleem is opgelost , (na enkele weken goed werken, opeens niet meer werken, al een paar keer gehad met vorige versie, dan de melding in logging, "de GIOP niet gestart wegens dubbel gebruik?)
Groet wim
ps gebruik al jaren met volle tevredenheid dit programma, maar de vorige versie (met alle patch), was niet zo fijn, deze 3.0.1 versie begint slecht, hopelijk blijft hij beter werken
Re: 3.0.1 start niet op
32Naar aanleiding van het vorige bericht, weer eens geprobeerd 3.01 te installeren zoals aldaar beschreven.
Ging op zich uitstekend, maar het geheel bleef tijdens het importeren van de database hangen op de melding: Ethernet wordt aangepast.
Uiteindelijk na zes uur de spanning van de raspberry af gehaald en na een paar minuten weer aangesloten. Raspberry starte weer op en P1monitor was gewoon bereikbaar en werkt zo ver ik kan nagaan normaal en zonder problemen.
Ging op zich uitstekend, maar het geheel bleef tijdens het importeren van de database hangen op de melding: Ethernet wordt aangepast.
Uiteindelijk na zes uur de spanning van de raspberry af gehaald en na een paar minuten weer aangesloten. Raspberry starte weer op en P1monitor was gewoon bereikbaar en werkt zo ver ik kan nagaan normaal en zonder problemen.
Re: 3.0.1 start niet op
33Zoals in de bijlage staat van de image /download wordt het aanbevolen de export / import optie te gebruiken. De UpgradeAide methode werkt niet als je alleen Wifi gebruikt. Als je RPi niet eenvoudig te bereiken is en het is mogelijk sluit dan een netwerkkabel aan. De netwerk software is onder Bookworm is aanzienlijk aangepast.
Sorry dat deze upgrade problemen geeft voor sommige.
Sorry dat deze upgrade problemen geeft voor sommige.
P1-monitor ontwikkelaar
Re: 3.0.1 start niet op
34ook problemen met 3.0.1
de upgrade backup is ook niet goed gegaan
bedraad komt deze wel online , echter wifi werkt niet
ook het importeer database geef een error .
oude versie 2.4.1 sd kaart weer erin , wifi werkt en importeer database werkt nu wel , binnen 2 minuten is de p1 monitor weer ouderwets online .
wel 2 uur data kwijt .. maar het werkt weer
ik laat deze dus voor wat het is .
de upgrade backup is ook niet goed gegaan
bedraad komt deze wel online , echter wifi werkt niet
ook het importeer database geef een error .
oude versie 2.4.1 sd kaart weer erin , wifi werkt en importeer database werkt nu wel , binnen 2 minuten is de p1 monitor weer ouderwets online .
wel 2 uur data kwijt .. maar het werkt weer
ik laat deze dus voor wat het is .
Re: 3.0.1 start niet op
35Na het updaten naar versie 3.0.1 werkt de RPI gewoon (Via LAN aangesloten en WLAN uitgeschakeld). Echter na het importeren van de backup werkt niets meer.
Een 2e poging blijft hij hangen op 96% tijdens de import van de oude database. De server geeft ook gelijk aan dat de RPI niet meer actief is.
Ik ga nu ook weer terug naar de vorige versie.
Een 2e poging blijft hij hangen op 96% tijdens de import van de oude database. De server geeft ook gelijk aan dat de RPI niet meer actief is.
Ik ga nu ook weer terug naar de vorige versie.
Re: 3.0.1 start niet op
36Uiteindelijk backup gemaakt, nieuw kaartje de nieuwe versie er op, lan kabel er in, systeem opgestart, backup terug gezet, jaarrekening mod gedaan en alles draait weer zoals het moet 
Dank voor de update!
Dank voor de update!
Re: 3.0.1 start niet op
37Nog maar eens een poging gedaan, Win32DiskImager gebruikt ( deze is wel sneller dan het andere programma )
aanzetten, netscan op MAC adres, gevonden, inloggen, backup terugzetten en klaar.
aanzetten, netscan op MAC adres, gevonden, inloggen, backup terugzetten en klaar.
Re: 3.0.1 start niet op
383.0.1 start niet op met wifi, ook niet met een lan-verbinding. Terug naar vorige versie in afwachting van een fix
Re: 3.0.1 start niet op
39In eerste instantie werkte het voor mij ook niet (maar ja, RTFM doe ik nooit - Upgrade Aide is een stabiele factor).
Ik had issues met de tijd in de eerdere versie (gmt +2 werd niet aangehouden, dus in grafieken was alles 2u vroeger), dus gisteravond voor het eerst de update gedraaid.
Zoals gezegd werkt het niet, RPI kwam via wifi niet meer online na de update. Vanochtend er dus achter gekomen dat ik toch even de notes moet lezen (ook in het mapje van je image). Dus zodoende, ethernetkabel aangesloten, opnieuw een sdhc kaartje geimaged met rufus, export gedraaid binnen de oude versie. sdhc kaartje verwisseld, daarna op laten starten met netwerkkabel, import gedraaid, hierna kwam de wifi weer online en na een minuutje of 6 was de import klaar (ruim 75k aan regels volgens de import).
Ik heb in het verleden ook eens de rpi op de TV aangesloten als er issues waren (en hiermee toch wat meer logs te zien zijn)…
Ik had issues met de tijd in de eerdere versie (gmt +2 werd niet aangehouden, dus in grafieken was alles 2u vroeger), dus gisteravond voor het eerst de update gedraaid.
Zoals gezegd werkt het niet, RPI kwam via wifi niet meer online na de update. Vanochtend er dus achter gekomen dat ik toch even de notes moet lezen (ook in het mapje van je image). Dus zodoende, ethernetkabel aangesloten, opnieuw een sdhc kaartje geimaged met rufus, export gedraaid binnen de oude versie. sdhc kaartje verwisseld, daarna op laten starten met netwerkkabel, import gedraaid, hierna kwam de wifi weer online en na een minuutje of 6 was de import klaar (ruim 75k aan regels volgens de import).
Ik heb in het verleden ook eens de rpi op de TV aangesloten als er issues waren (en hiermee toch wat meer logs te zien zijn)…
Re: 3.0.1 start niet op
40Ik krijg 3.0.1 wel geinstalleerd en gestart, maar het lijkt erop alsof de applicatie zelf niet wil draaien met na upgrade aide, alleen de web-interface.
Geen p1 data, er is zelfs geen logging behalve van de upgrade aide en ethernet config. Ergens zal python wel een exception gedumpt hebben, maar ik weet niet waar.
Ik heb ingelogd met ssh en in de kernel logs gegeken, maar daar zag ik niets zorgelijks.
Na een sudo reboot now lijkt het systeem te werken, de reboot knop op de website werkt waarschijnlijk niet als de applicatie niet draait.
Geen p1 data, er is zelfs geen logging behalve van de upgrade aide en ethernet config. Ergens zal python wel een exception gedumpt hebben, maar ik weet niet waar.
Ik heb ingelogd met ssh en in de kernel logs gegeken, maar daar zag ik niets zorgelijks.
Na een sudo reboot now lijkt het systeem te werken, de reboot knop op de website werkt waarschijnlijk niet als de applicatie niet draait.
Code: Selecteer alles
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.12.20+rpt-rpi-v7 (serge@raspberrypi.com) (arm-linux-gnueabihf-gcc-12 (Raspbian 12.2.0-14+rpi1) 12.2.0, GNU ld (GNU Binutils for Raspbian) 2.40) #1 SMP Raspbian 1:6.12.20-1+rpt1~bpo12+1 (2025-03-19)
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x1e400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x1e400000..0x2e3fffff (262144 KiB) map reusable linux,cma
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003e5fffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003e5fffff]
[ 0.000000] percpu: Embedded 19 pages/cpu s45644 r8192 d23988 u77824
[ 0.000000] pcpu-alloc: s45644 r8192 d23988 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=ab39368b-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=NL
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 255488
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37255 entries in 110 pages
[ 0.000000] ftrace: allocated 110 pages with 5 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000008] Switching to timer-based delay loop, resolution 52ns
[ 0.000226] Console: colour dummy device 80x30
[ 0.000237] printk: legacy console [tty1] enabled
[ 0.000612] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000635] CPU: Testing write buffer coherency: ok
[ 0.000675] pid_max: default: 32768 minimum: 301
[ 0.000739] LSM: initializing lsm=capability
[ 0.000875] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000898] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001656] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.090177] Setting up static identity map for 0x100000 - 0x10003c
[ 0.100065] rcu: Hierarchical SRCU implementation.
[ 0.100078] rcu: Max phase no-delay instances is 1000.
[ 0.100247] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.120147] smp: Bringing up secondary CPUs ...
[ 0.170355] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.220333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.270352] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.270416] smp: Brought up 1 node, 4 CPUs
[ 0.270464] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.270477] CPU: All CPU(s) started in HYP mode.
[ 0.270487] CPU: Virtualization extensions available.
[ 0.270863] Memory: 716464K/1021952K available (11264K kernel code, 1513K rwdata, 3440K rodata, 1024K init, 376K bss, 39704K reserved, 262144K cma-reserved)
[ 0.271252] devtmpfs: initialized
[ 0.277580] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.277720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.277754] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.282885] pinctrl core: initialized pinctrl subsystem
[ 0.283684] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.285050] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.287465] audit: initializing netlink subsys (disabled)
[ 0.287647] audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
[ 0.287942] thermal_sys: Registered thermal governor 'step_wise'
[ 0.288119] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.288146] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.288344] Serial: AMBA PL011 UART driver
[ 0.292396] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.310259] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-03-19T18:25:40, variant start_cd
[ 0.320262] raspberrypi-firmware soc:firmware: Firmware hash is ca6e8171a80ea46924ffaa629250bfb482f3a02c
[ 0.332200] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.341325] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
[ 0.342603] SCSI subsystem initialized
[ 0.342726] usbcore: registered new interface driver usbfs
[ 0.342757] usbcore: registered new interface driver hub
[ 0.342791] usbcore: registered new device driver usb
[ 0.343022] pps_core: LinuxPPS API ver. 1 registered
[ 0.343034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.343058] PTP clock support registered
[ 0.344414] clocksource: Switched to clocksource arch_sys_counter
[ 0.344700] VFS: Disk quotas dquot_6.6.0
[ 0.344725] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.355115] NET: Registered PF_INET protocol family
[ 0.355395] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.356570] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.356601] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.356621] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.356682] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.356876] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.356962] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.356995] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.357109] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.357406] RPC: Registered named UNIX socket transport module.
[ 0.357421] RPC: Registered udp transport module.
[ 0.357432] RPC: Registered tcp transport module.
[ 0.357441] RPC: Registered tcp-with-tls transport module.
[ 0.357452] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.364714] Trying to unpack rootfs image as initramfs...
[ 0.986327] Freeing initrd memory: 10656K
[ 1.298510] Initialise system trusted keyrings
[ 1.298735] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.299232] NFS: Registering the id_resolver key type
[ 1.299258] Key type id_resolver registered
[ 1.299269] Key type id_legacy registered
[ 1.299290] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.299304] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.299698] Key type asymmetric registered
[ 1.299714] Asymmetric key parser 'x509' registered
[ 1.299760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.299778] io scheduler mq-deadline registered
[ 1.299790] io scheduler kyber registered
[ 1.299822] io scheduler bfq registered
[ 1.300905] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
[ 1.310242] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.311299] simple-framebuffer 3ef53000.framebuffer: framebuffer at 0x3ef53000, 0xa8c00 bytes
[ 1.311345] simple-framebuffer 3ef53000.framebuffer: format=r5g6b5, mode=720x480x16, linelength=1440
[ 1.312872] Console: switching to colour frame buffer device 90x30
[ 1.314796] simple-framebuffer 3ef53000.framebuffer: fb0: simplefb registered!
[ 1.318184] bcm2835-rng 3f104000.rng: hwrng registered
[ 1.319081] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[ 1.325751] brd: module loaded
[ 1.329918] loop: module loaded
[ 1.330974] Loading iSCSI transport class v2.0-870.
[ 1.332443] usbcore: registered new interface driver lan78xx
[ 1.333152] usbcore: registered new interface driver smsc95xx
[ 1.333819] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.062379] Core Release: 2.80a
[ 2.063038] Setting default values for core params
[ 2.063704] Finished setting default values for core params
[ 2.264509] Using Buffer DMA mode
[ 2.265142] Periodic Transfer Interrupt Enhancement - disabled
[ 2.265786] Multiprocessor Interrupt Enhancement - disabled
[ 2.266439] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.267112] Dedicated Tx FIFOs mode
[ 2.269121] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = 9e504000 dma = 0xde504000 len=9024
[ 2.271048] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 2.274025] dwc_otg: Microframe scheduler enabled
[ 2.274097] WARN::hcd_init_fiq:457: FIQ on core 1
[ 2.275202] WARN::hcd_init_fiq:458: FIQ ASM at 808d8cb0 length 36
[ 2.276313] WARN::hcd_init_fiq:496: MPHI regs_base at be810000
[ 2.277452] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.278055] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.278673] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[ 2.279298] Init: Port Power? op_state=1
[ 2.279884] Init: Power Port (0)
[ 2.280575] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 2.281755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.282385] usb usb1: Product: DWC OTG Controller
[ 2.283004] usb usb1: Manufacturer: Linux 6.12.20+rpt-rpi-v7 dwc_otg_hcd
[ 2.283639] usb usb1: SerialNumber: 3f980000.usb
[ 2.284669] hub 1-0:1.0: USB hub found
[ 2.285307] hub 1-0:1.0: 1 port detected
[ 2.286220] dwc_otg: FIQ enabled
[ 2.286226] dwc_otg: NAK holdoff enabled
[ 2.286230] dwc_otg: FIQ split-transaction FSM enabled
[ 2.286238] Module dwc_common_port init
[ 2.286439] usbcore: registered new interface driver usb-storage
[ 2.287155] mousedev: PS/2 mouse device common for all mice
[ 2.289042] sdhci: Secure Digital Host Controller Interface driver
[ 2.289675] sdhci: Copyright(c) Pierre Ossman
[ 2.290480] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.291139] hid: raw HID events driver (C) Jiri Kosina
[ 2.291865] usbcore: registered new interface driver usbhid
[ 2.292496] usbhid: USB HID core driver
[ 2.296232] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 (8000003f) counters available
[ 2.298054] Initializing XFRM netlink socket
[ 2.298726] NET: Registered PF_PACKET protocol family
[ 2.299428] Key type dns_resolver registered
[ 2.300213] Registering SWP/SWPB emulation handler
[ 2.314816] registered taskstats version 1
[ 2.315607] Loading compiled-in X.509 certificates
[ 2.321864] Key type .fscrypt registered
[ 2.322508] Key type fscrypt-provisioning registered
[ 2.327822] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 2.328705] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[ 2.330056] serial serial0: tty port ttyAMA1 registered
[ 2.331569] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.332607] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.333920] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 2.334623] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 2.361015] of_cfs_init
[ 2.361749] of_cfs_init: OK
[ 2.362691] clk: Disabling unused clocks
[ 2.363487] PM: genpd: Disabling unused power domains
[ 2.414492] Indeed it is in host mode hprt0 = 00021501
[ 2.500532] mmc1: new high speed SDIO card at address 0001
[ 2.502858] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 2.506592] Freeing unused kernel image (initmem) memory: 1024K
[ 2.507457] Run /init as init process
[ 2.508048] with arguments:
[ 2.508052] /init
[ 2.508055] with environment:
[ 2.508058] HOME=/
[ 2.508062] TERM=linux
[ 2.604585] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.605350] Indeed it is in host mode hprt0 = 00001101
[ 2.712707] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.717779] mmc0: new high speed SDHC card at address aaaa
[ 2.719039] mmcblk0: mmc0:aaaa SH32G 29.7 GiB
[ 2.722257] mmcblk0: p1 p2
[ 2.723338] mmcblk0: mmc0:aaaa SH32G 29.7 GiB (quirks 0x00004000)
[ 2.815008] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 2.821612] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.824220] hub 1-1:1.0: USB hub found
[ 2.825081] hub 1-1:1.0: 4 ports detected
[ 3.124532] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.224671] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 3.226120] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.227336] hub 1-1.1:1.0: USB hub found
[ 3.228141] hub 1-1.1:1.0: 3 ports detected
[ 3.327751] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 3.421293] EXT4-fs (mmcblk0p2): mounted filesystem 6178b94a-db05-41eb-937e-9efa3f5a90a4 ro with ordered data mode. Quota mode: none.
[ 3.453206] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ 3.455069] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.455878] usb 1-1.2: Product: FT232R USB UART
[ 3.455883] usb 1-1.2: Manufacturer: FTDI
[ 3.455888] usb 1-1.2: SerialNumber: AQ4QXP73
[ 3.524450] usb 1-1.1.2: new high-speed USB device number 5 using dwc_otg
[ 3.665439] usb 1-1.1.2: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.10
[ 3.667013] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.667802] usb 1-1.1.2: Product: TransMemory
[ 3.668567] usb 1-1.1.2: Manufacturer: TOSHIBA
[ 3.669312] usb 1-1.1.2: SerialNumber: C03FD5F76E64E331B000C5AA
[ 3.670511] usb-storage 1-1.1.2:1.0: USB Mass Storage device detected
[ 3.673795] scsi host0: usb-storage 1-1.1.2:1.0
[ 3.934436] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg
[ 4.044693] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 4.046219] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.054687] systemd[1]: System time before build time, advancing clock.
[ 4.237155] NET: Registered PF_INET6 protocol family
[ 4.238708] Segment Routing with IPv6
[ 4.239496] In-situ OAM (IOAM) with IPv6
[ 4.310608] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed[ 4.325626] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 4.330769] systemd[1]: systemd 252.36-1~deb12u1+rpi1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.334749] systemd[1]: Detected architecture arm.
[ 4.345385] systemd[1]: Hostname set to <p1monitor>.
[ 4.725071] scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 6
[ 4.773943] sd 0:0:0:0: [sda] 60506112 512-byte logical blocks: (31.0 GB/28.9 GiB)
[ 4.775098] sd 0:0:0:0: [sda] Write Protect is off
[ 4.775917] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 4.776171] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.845225] sda: sda1
[ 4.846263] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.928761] systemd[1]: /lib/systemd/system/nginx.service:27: Unknown key 'ExexStartPre' in section [Service], ignoring.
[ 5.230844] systemd[1]: Queued start job for default target multi-user.target.
[ 5.286822] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 5.290176] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 5.293308] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 5.296686] systemd[1]: Created slice user.slice - User and Session Slice.
[ 5.298741] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 5.301596] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 5.305138] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 5.308078] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-ab39368b\x2d01.device - /dev/disk/by-partuuid/ab39368b-01...
[ 5.311014] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 5.313127] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 5.316254] systemd[1]: Reached target paths.target - Path Units.
[ 5.318353] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 5.320402] systemd[1]: Reached target slices.target - Slice Units.
[ 5.322501] systemd[1]: Reached target swap.target - Swaps.
[ 5.324595] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 5.327930] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 5.331029] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 5.334823] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 5.338257] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 5.341648] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 5.344276] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 5.347647] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 5.350296] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 5.404733] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 5.410053] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 5.415999] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 5.423641] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 5.431649] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 5.438963] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 5.446856] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 5.454644] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 5.463062] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 5.472260] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 5.482000] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 5.489541] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 5.493050] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 5.501711] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 5.507760] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 5.514699] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 5.522131] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 5.532043] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 5.535508] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 5.538709] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 5.542237] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 5.542419] fuse: init (API version 7.41)
[ 5.548109] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 5.552658] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.554325] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 5.569076] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 5.570702] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 5.574454] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 5.576860] i2c_dev: i2c /dev entries driver
[ 5.581223] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 5.586518] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.588233] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 5.592120] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 5.594012] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 5.597884] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 5.676445] EXT4-fs (mmcblk0p2): re-mounted 6178b94a-db05-41eb-937e-9efa3f5a90a4 r/w. Quota mode: none.
[ 5.684964] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 5.690668] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 5.694317] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.702466] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 5.722098] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.723778] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 5.727156] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 5.730744] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 5.734270] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 5.738280] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.740528] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 5.747682] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 5.754294] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 5.771944] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 5.807168] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 5.813540] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[ 5.822724] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown...
[ 5.825558] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 5.827732] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.831884] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 5.837014] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...[ 5.840922] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown.
[ 5.889080] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 5.890619] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 5.895574] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 6.081850] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
[ 6.468542] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
[ 6.468803] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
[ 6.526586] systemd[1]: Found device dev-disk-by\x2dpartuuid-ab39368b\x2d01.device - /dev/disk/by-partuuid/ab39368b-01.
[ 6.563641] mc: Linux media interface: v0.10
[ 6.602856] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.605046] systemd[1]: Mounting p1mon-mnt-ramdisk.mount - /p1mon/mnt/ramdisk...
[ 6.612352] systemd[1]: Starting systemd-fsck@dev-disk-by\x2dpartuuid-ab39368b\x2d01.service - File System Check on /dev/disk/by-partuuid/ab39368b-01...
[ 6.619446] bcm2835-audio bcm2835-audio: card created with 8 channels
[ 6.619665] systemd[1]: Mounted p1mon-mnt-ramdisk.mount - /p1mon/mnt/ramdisk.
[ 6.668432] systemd[1]: Started systemd-fsckd.service - File System Check Daemon to report status.
[ 6.684980] videodev: Linux video capture interface: v2.00
[ 6.698956] usbcore: registered new interface driver uas
[ 6.795459] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.796351] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 6.796381] [vc_sm_connected_init]: start
[ 6.796830] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.797602] vc_sm_cma_vchi_init: failed to open VCHI service (-22)
[ 6.797635] [vc_sm_connected_init]: failed to initialize shared memory service
[ 6.820623] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.864812] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.866532] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.872760] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22)
[ 6.872916] : Unregister from media controller
[ 6.872927] (efault): Unregistering node (null)[0] device node /dev/video0
[ 6.872934] (efault): Unregistering node (null)[0] device node /dev/video0
[ 6.872939] (efault): Unregistering node (null)[0] device node /dev/video0
[ 6.872944] (efault): Unregistering node (null)[0] device node /dev/video0
[ 6.888468] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22)
[ 6.892193] Bluetooth: Core ver 2.22
[ 6.892313] NET: Registered PF_BLUETOOTH protocol family
[ 6.892320] Bluetooth: HCI device and connection manager initialized
[ 6.892340] Bluetooth: HCI socket layer initialized
[ 6.892350] Bluetooth: L2CAP socket layer initialized
[ 6.892368] Bluetooth: SCO socket layer initialized
[ 6.906042] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.921157] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22)
[ 6.965397] Bluetooth: HCI UART driver ver 2.3
[ 6.965423] Bluetooth: HCI UART protocol H4 registered
[ 6.965492] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.966220] Bluetooth: HCI UART protocol Broadcom registered
[ 6.966832] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 6.974782] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 7.038552] usbcore: registered new interface driver usbserial_generic
[ 7.038973] usbserial: USB Serial support registered for generic
[ 7.060990] systemd[1]: Finished systemd-fsck@dev-disk-by\x2dpartuuid-ab39368b\x2d01.service - File System Check on /dev/disk/by-partuuid/ab39368b-01.
[ 7.067851] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.077520] raspberrypi-poe-pwm soc:firmware:pwm: Failed to get duty cycle: -EIO
[ 7.077548] raspberrypi-poe-pwm soc:firmware:pwm: probe with driver raspberrypi-poe-pwm failed with error -5
[ 7.087955] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 7.089235] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 7.090365] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.091464] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 7.124978] systemd[1]: Mounting boot-firmware.mount - /boot/firmware...
[ 7.178495] systemd[1]: Mounted boot-firmware.mount - /boot/firmware.
[ 7.180060] systemd[1]: Reached target local-fs.target - Local File Systems.
[ 7.181546] systemd[1]: apparmor.service - Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[ 7.185301] systemd[1]: Starting console-setup.service - Set console font and keymap...
[ 7.192135] systemd[1]: Starting log2ram.service - Log2Ram...
[ 7.198579] systemd[1]: Starting networking.service - Raise network interfaces...
[ 7.213582] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
[ 7.215303] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
[ 7.220861] systemd[1]: Finished console-setup.service - Set console font and keymap.
[ 7.252782] usbcore: registered new interface driver ftdi_sio
[ 7.252835] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.252955] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 7.253044] usb 1-1.2: Detected FT232R
[ 7.263291] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 347 (systemd-binfmt)
[ 7.323422] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.335107] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
[ 7.350097] systemd[1]: networking.service: Main process exited, code=exited, status=1/FAILURE
[ 7.369094] Bluetooth: hci0: BCM: chip id 107
[ 7.369398] Bluetooth: hci0: BCM: features 0x2f
[ 7.369675] systemd[1]: networking.service: Failed with result 'exit-code'.
[ 7.370272] systemd[1]: Failed to start networking.service - Raise network interfaces.
[ 7.373352] Bluetooth: hci0: BCM4345C0
[ 7.373382] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 7.374810] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.378845] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.379608] usbcore: registered new interface driver brcmfmac
[ 7.385666] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[ 7.394399] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,3-model-b-plus.hcd' Patch
[ 7.403076] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
[ 7.543380] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 7.585165] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status...
[ 7.661788] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 7.662397] systemd[1]: apparmor.service - Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[ 7.669475] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 7.680729] Console: switching to colour dummy device 80x30
[ 7.684128] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 7.685372] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 7.693864] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 7.694776] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[ 7.697735] Registered IR keymap rc-cec
[ 7.698327] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[ 7.698514] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
[ 7.701091] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 7.703846] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 7.705987] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 7.708078] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
[ 7.713478] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status.
[ 7.716271] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 7.717810] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 7.725165] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 7.736502] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 7.741773] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 7.744150] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 7.752518] input: vc4-hdmi HDMI Jack as /devices/platform/soc/3f902000.hdmi/sound/card1/input1
[ 7.756653] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 7.757026] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 7.757326] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.757571] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.757831] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.762415] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 7.776278] [drm] Initialized vc4 0.0.0 for soc:gpu on minor 0
[ 7.777025] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[ 7.779631] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[ 7.918028] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 7.918855] systemd[1]: apparmor.service - Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[ 7.984936] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 7.989512] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 7.994596] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 7.995103] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 7.995306] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 7.995669] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
[ 8.000822] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 8.001554] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 8.003188] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 8.003854] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 8.004907] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 8.009237] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 8.009858] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 8.010911] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 8.014233] systemd[1]: Finished log2ram.service - Log2Ram.
[ 8.020743] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 8.164811] systemd[1]: Started systemd-journald.service - Journal Service.
[ 8.181843] Bluetooth: hci0: BCM: features 0x2f
[ 8.183135] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 8.183143] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 8.183457] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 8.249043] systemd-journald[436]: Received client request to flush runtime journal.
[ 9.242435] Adding 204796k swap on /var/swap. Priority:-2 extents:5 across:3670012k SS
[ 9.272025] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.272051] Bluetooth: BNEP filters: protocol multicast
[ 9.272069] Bluetooth: BNEP socket layer initialized
[ 9.291891] Bluetooth: MGMT ver 1.23
[ 9.310276] NET: Registered PF_ALG protocol family
[ 9.402331] cryptd: max_cpu_qlen set to 1000
[ 10.826217] lan78xx 1-1.1.1:1.0 eth0: kevent 4 may have been dropped
[ 10.832805] lan78xx 1-1.1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[ 10.882592] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 18.404724] platform pwm-fan: deferred probe pending: pwm-fan: Could not get PWM
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):/var/log/p1monitor $ cat P1EthernetConfig.log
2025-04-06 10:36:08,255 - P1EthernetConfig - INFO - Start van programma.
2025-04-06 10:36:08,283 - P1EthernetConfig - INFO - Main: wordt uitgevoerd als user -> p1mon
2025-04-06 10:36:08,456 - P1EthernetConfig - INFO - EthernetConfigure.ethernet_lib.device_is_set: device eth0 found.
2025-04-06 10:36:08,458 - P1EthernetConfig - INFO - Main: device eth0 is already present, no action.
2025-04-06 10:36:12,387 - P1EthernetConfig - INFO - Start van programma.
2025-04-06 10:36:12,415 - P1EthernetConfig - INFO - Main: wordt uitgevoerd als user -> p1mon
2025-04-06 10:36:12,611 - P1EthernetConfig - INFO - EthernetConfigure.ethernet_lib.set: configuration of Ethernet started.
2025-04-06 10:36:12,725 - P1EthernetConfig - INFO - EthernetConfigure.ethernet_lib.set: Ethernet is in use, removing eth0 with id f690582a-db65-367e-a77c-7ca5e53829ba
2025-04-06 10:36:12,726 - P1EthernetConfig - INFO - Device.nmcli_lib.remove_connection: removing connection f690582a-db65-367e-a77c-7ca5e53829ba
2025-04-06 10:36:12,853 - P1EthernetConfig - INFO - nmcli_lib.run_os_process: nmcli respons = Connection 'Wired connection 1' (f690582a-db65-367e-a77c-7ca5e53829ba) successfully deleted.
2025-04-06 10:36:12,853 - P1EthernetConfig - INFO - Device.nmcli_lib.remove_connection: connection with identifier f690582a-db65-367e-a77c-7ca5e53829ba successfully removed.
2025-04-06 10:36:12,854 - P1EthernetConfig - INFO - Device.nmcli_lib.set_ethernet: adding connection p1monEthernet.
2025-04-06 10:36:13,054 - P1EthernetConfig - INFO - nmcli_lib.run_os_process: nmcli respons = Connection 'p1monEthernet' (b9be1791-7f29-4b7a-adb2-f09fec12c6c9) successfully added.
2025-04-06 10:36:13,055 - P1EthernetConfig - INFO - Device.nmcli_lib.set_ethernet: connection p1monEthernet successfully added.
2025-04-06 10:36:13,243 - P1EthernetConfig - INFO - update_ip_in_status_db: starting check if Ethernet is active
2025-04-06 10:36:18,261 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 5 seconds.
2025-04-06 10:36:23,270 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 10 seconds.
2025-04-06 10:36:28,279 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 15 seconds.
2025-04-06 10:36:33,288 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 20 seconds.
2025-04-06 10:36:38,296 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 25 seconds.
2025-04-06 10:36:43,305 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 30 seconds.
2025-04-06 10:36:48,314 - P1EthernetConfig - INFO - update_ip_in_status_db: waiting for Ethernet to become active now for 35 seconds.
2025-04-06 10:36:48,322 - P1EthernetConfig - INFO - update_ip_in_status_db: Ethernet is active on IP adres 192.168.93.200
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):/var/log/p1monitor $ cat P1UpgradeAide.log
2025-04-06 10:36:10,121 - P1UpgradeAide - INFO - Start van programma met process id 663 en als user -> p1mon
2025-04-06 10:36:10,180 - P1UpgradeAide - INFO - restore: Herstellen van gegevens gestart.
2025-04-06 10:36:10,180 - P1UpgradeAide - INFO - Controle op eerder gebruikt drive /dev/sda1 gestart.
2025-04-06 10:36:10,395 - P1UpgradeAide - INFO - Folder /p1mon/mnt/usb/p1monitor/aide bestaat op device /dev/sda1
2025-04-06 10:36:10,398 - P1UpgradeAide - INFO - restore: USB path /p1mon/mnt/usb/p1monitor/aide/20250629214658.restore gevonden.
2025-04-06 10:36:10,402 - P1UpgradeAide - INFO - restore: folder /p1mon/mnt/usb/p1monitor/aide/20250629214658.restore gewijzigt naar /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy
2025-04-06 10:36:10,404 - P1UpgradeAide - INFO - restore: USB path /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy wordt gebruikt.
2025-04-06 10:36:10,523 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/06_watermeter.db gekopieerd naar /p1mon/data/06_watermeter.db
2025-04-06 10:36:10,533 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/06_watermeter.db gekopieerd naar /p1mon/mnt/ramdisk/06_watermeter.db
2025-04-06 10:36:10,831 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/05_powerproduction.db gekopieerd naar /p1mon/data/05_powerproduction.db
2025-04-06 10:36:10,849 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/05_powerproduction.db gekopieerd naar /p1mon/mnt/ramdisk/05_powerproduction.db
2025-04-06 10:36:11,106 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/04_faseinformatie.db gekopieerd naar /p1mon/data/04_faseinformatie.db
2025-04-06 10:36:11,123 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/04_faseinformatie.db gekopieerd naar /p1mon/mnt/ramdisk/04_faseinformatie.db
2025-04-06 10:36:11,135 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/02_temperatuur.db gekopieerd naar /p1mon/data/02_temperatuur.db
2025-04-06 10:36:11,138 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/02_temperatuur.db gekopieerd naar /p1mon/mnt/ramdisk/02_temperatuur.db
2025-04-06 10:36:11,286 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/01_weer_historie.db gekopieerd naar /p1mon/data/01_weer_historie.db
2025-04-06 10:36:11,297 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/01_weer_historie.db gekopieerd naar /p1mon/mnt/ramdisk/01_weer_historie.db
2025-04-06 10:36:11,309 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/weer.db gekopieerd naar /p1mon/data/weer.db
2025-04-06 10:36:11,313 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/weer.db gekopieerd naar /p1mon/mnt/ramdisk/weer.db
2025-04-06 10:36:11,323 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/financieel.db gekopieerd naar /p1mon/data/financieel.db
2025-04-06 10:36:11,326 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/financieel.db gekopieerd naar /p1mon/mnt/ramdisk/financieel.db
2025-04-06 10:36:11,583 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/e_historie.db gekopieerd naar /p1mon/data/e_historie.db
2025-04-06 10:36:11,601 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/e_historie.db gekopieerd naar /p1mon/mnt/ramdisk/e_historie.db
2025-04-06 10:36:11,605 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/config.db gekopieerd naar /p1mon/data/config.db
2025-04-06 10:36:11,608 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/config.db gekopieerd naar /p1mon/mnt/ramdisk/config.db
2025-04-06 10:36:11,612 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/status.db gekopieerd naar /p1mon/data/status.db
2025-04-06 10:36:11,614 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/status.db gekopieerd naar /p1mon/mnt/ramdisk/status.db
2025-04-06 10:36:11,913 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/e_serial.db gekopieerd naar /p1mon/data/e_serial.db
2025-04-06 10:36:11,933 - P1UpgradeAide - INFO - restore: bestand /p1mon/mnt/usb/p1monitor/aide/20250629214658.busy/db/e_serial.db gekopieerd naar /p1mon/mnt/ramdisk/e_serial.db
2025-04-06 10:36:48,434 - P1UpgradeAide - INFO - restore: Ethernet configuratie is geconfigureerd.
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):/var/log/p1monitor $ ls
P1CryptoV2.log P1EthernetConfig.log P1UpgradeAide.log P1WifiConfig.log
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):/var/log/p1monitor $ cat P1WiFiConfig.log
cat: P1WiFiConfig.log: No such file or directory
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):/var/log/p1monitor $ cat P1WifiConfig.log
2025-04-06 10:36:49,382 - P1WifiConfig - INFO - Start van programma.
2025-04-06 10:36:49,435 - P1WifiConfig - INFO - Main: wordt uitgevoerd als user -> p1mon
2025-04-06 10:36:49,634 - P1WifiConfig - INFO - WifiConfigure.wifi_lib.set: configuration of Wifi started.
2025-04-06 10:36:49,757 - P1WifiConfig - INFO - Device.nmcli_lib.set_wifi: adding connection p1monWifi.
2025-04-06 10:36:49,910 - P1WifiConfig - INFO - nmcli_lib.run_os_process: nmcli respons = Connection 'p1monWifi' (3fd72e23-1c59-438c-882d-314b0d1d6114) successfully added.
2025-04-06 10:36:49,911 - P1WifiConfig - INFO - Device.nmcli_lib.set_wifi: connection p1monWifi successfully added.
2025-04-06 10:36:50,031 - P1WifiConfig - INFO - update_ip_in_status_db: starting check if Wifi is active
2025-04-06 10:36:55,040 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 5 seconds.
2025-04-06 10:37:00,053 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 10 seconds.
2025-06-29 21:54:35,931 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 15 seconds.
2025-06-29 21:54:40,945 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 20 seconds.
2025-06-29 21:54:45,963 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 25 seconds.
2025-06-29 21:54:50,982 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 30 seconds.
2025-06-29 21:54:56,001 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 35 seconds.
2025-06-29 21:55:01,020 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 40 seconds.
2025-06-29 21:55:06,039 - P1WifiConfig - INFO - update_ip_in_status_db: waiting for Wifi to become active now for 45 seconds.
p1mon@p1monitor(eth0=192.168.93.200 wlan0=):/var/log/p1monitor $ sudo reboot now